Thứ Tư, 30 tháng 12, 2015

1996 Toyota Corolla DX

The 1996 Toyota Corolla DX features a 1.8 liter, DOHC 16-valve, cast iron block, aluminum cylinder head with belt-driven camshafts. The engine generates 105 horsepower with 117 ft-lbs of torque. Emission control is managed by an OBD II Scanner, 3-Way Catalyst and EGR with exhaust temperature sensor and a backpressure transducer. The car uses regular unleaded gasoline and a distributor with a variable reluctance crank and cam sensors boost its ignition.

14 Engine Specifications

GM 2.0 Liter Turbo I4 Ecotec LHU Engine
GM 2.0 Liter Turbo I4 Ecotec LHU Engine
Type (7A-FE) 1.8L, DOHC 16-valve, cast iron block, aluminum cylinder head and belt-driven camshafts Displacement 1762cc (107.5 cid) Bore x Stroke 81.0 x 85.5mm (3.19 x 3.37 ins.) Horsepower 105 hp @ 5200 rpm Torque 117 ft-lbs @ 2800 rpm Firing Order 1-3-4-2 Compression Ratio 9.5:1 Compression @ 250 rpm W.O.T. 191 psi normal, 142 psi minimum with 14 psi max. cylinder variation Emission Control OBD II, 3-Way Catalyst, EGR with backpressure transducer and exhaust temp sensor Fuel System SFI/speed density Required Fuel Regular unleaded Fuel Pressure KOEO 38-44 psi Fuel Rest Pressure 21 psi or more for a minimum of five minutes Oil Pressure 43 psi or more at idle Fuel Injectors 13.4-14.2 [omega] @ 68 [degrees] F Spark Plug Gap .031 in. (.8mm) Ignition Timing 10 [degrees] [+ or -] 2 [degrees] BTDC idle speed (TE1 and El jumped) Idle Speed 700 [+ or -] 50 rpm Valve Adjust Intake. 006-.010-in Exhaust .010-.014-in. (cold settings) Timing Belt Replace at 60K miles   Electrical System Battery- 12V 310 CCA Alternator- 70 amp Ignition- Distributor with variable reluctance crank and cam sensors Capacities Refrigerant- 1.543 lbs [+ or -] 1.75 oz. Cooling system- 5.8 qts. (M/T) Cooling System- 6.6 qts. (A/T) Fuel tank- 13.2 gallons Oil- drain & refill (w/filter) 3.9 qts. Man. trans - drain & refill 2.7 qts. Auto. trans - drain & refill 3.3 qts. Fluid Specifications Engine- SG/SH, EC II* Man. transaxle- API GL-4 or 5 Auto. transaxle- ATF Dexron II Brake- DOT 3 P/S- Dexron II ATF A/C Compressor- PAG ND Oil 8 *Check manual for viscosity

Chassis Spnifications

Drivetrain FWD electronic 4-spd. automatic transaxle w/lockup torque converter & shift interlock, or 5-spd. manual transaxle Brake System Vacuum assisted, disc/drum, non-integral 4-channel ABS (optional) Wheel Speed Sensors (front) .6-1.8 k.[omega], (rear).8-2.05 k[omega] Front Disc Thickness .866 in. new /.787 in. minimum Rear Drum Inside Diameter 7.874 ins. new / 7.913 ins. max. Suspension System Front: Independent MacPherson strut, with .94 in. stabilizer bar Rear: Independent MacPherson strut, with .55 in. stabilizer bar Front Alignment Specifications Total Toe In: 0.1[degrees] [+ or -] 0.2[degrees] Camber: - 10' [+ or -] 45' n/a Camber error left to right: 3.0[degrees] or less Steering Axis Inclination: 12[degrees] 35' [+ or -] 45'(n/a) Caster: 1[degrees] 20' [+ or -] 45' n/a Rear Alignment Specifications Total Toe In: 0.3[degrees] [+ or -] 0.2[degrees] Camber: 55' [+ or -] 45' n/a Camber error left to right: 30' or less

Technical Notes

OBD II DLC
OBD II DLC
The 16 terminal OBD II DLC (data link connector) is located underneath the instrument panel and is used for communicating with the PCM. The DLCI connector is located next to the left shock tower in front of the master cylinder, and is used to assist the technician with additional driveability and emission related diagnostics, learn more about how to OBD2 scanners work at this website. For example, jumping terminals +B and FP in the DLC1 with the key on will energize the fuel pump for pressure testing. For checking ignition timing and idle speed, terminals TE1 and E1 should be jumped to retard timing to its base setting. Terminal IG is used to connect a tachometer for obtaining rpm readings.